Futsal court dimensions and contractor striping guide

Lay out a common international 40 m by 20 m futsal court from the centers of its 8 cm lines, then verify the boundary, halfway line, circles, penalty areas, marks, and goals before painting.

Step-by-step layout mode

The large grid diagram below highlights one contractor step at a time with the active measurement labels.

Contractor striping steps

1

Step 1 of 10

Confirm the court specification

Confirm the owner wants the common 40 m by 20 m layout and identify the exact surface limits, runoff, goal anchors, and line color.

Do not assume every school, club, or park uses the same permissible dimension within the rules.

Common playing court40 m x 20 m

About 131 ft 3 in by 65 ft 7 in to the outside edges of the boundary lines.

Line width3.15 in (8 cm)

Use the center of each line as the contractor layout reference.

Goals3 m x 2 m

Inside width by height; use anchors appropriate for the surface and facility.

Planning surface46 m x 26 m

A site-planning allowance with about 3 m around the marked court, not a FIFA-required runoff dimension.

Futsal line-center measurements

These values place the layout path at the middle of each 8 cm painted line.

Boundary centerline rectangle130 ft 11.5 in x 65 ft 4.5 in39.92 m by 19.92 m.
Halfway line65 ft 6 in from either goal-line centerSquare across the full boundary centerline width.
Center circle radius9 ft 10 in (3 m)
Penalty-area arc radius19 ft 8 in (6 m)Arcs originate at the outside edge of each goalpost.
Penalty mark19 ft 8 in (6 m) from goal-line midpoint
Second penalty mark32 ft 9.5 in (10 m) from goal-line midpoint
Full boundary diagonal146 ft 4 1/2 inBoth diagonals should match before striping.
Layout note

International futsal courts are commonly 40 m by 20 m; competition rules permit ranges, so confirm the required level of play before layout.

Layout note

The penalty area uses 6 m quarter-circle arcs from the outside of the goalposts joined by a 3.16 m line parallel to the goal line.

Layout note

Outdoor acrylic installations still require a suitable base, drainage, slope, coating system, and anchored or safely weighted equipment.

Layout note

The 46 m by 26 m planning surface is a site-planning allowance used by this tool, not a governing-body certification dimension.

FIFA Futsal Laws of the Game

Source checked 2026-09-11.

Review source
FIFA futsal playing-surface standards

Source checked 2026-09-11.

Review source
U.S. Soccer futsal court reference

Source checked 2026-09-11.

Review source

Use the measurements before the quote request.

These dimensions help you plan the layout. The calculator prices the scope, the colorizer previews the surface, and the map estimator places the court, fencing, lighting, and related items on the property.