Enter surface area
Start with square footage for the driveway, parking area, or paved surface that needs sealcoating.
Sealcoating cost calculator
Estimate asphalt sealcoating cost before you map the surface.
Sealcoating is different from new asphalt paving. Start with the square footage and access assumptions, then localize the estimate or draw the actual driveway, lot, or paved area on the map.
Add local context
Address or ZIP context can apply approved local labor, demand, regional, weather, permit, and soil signals where published.
Map the real shape
Open the estimator to outline the exact surface, add photos, note cracks or oil spots, and request quotes when ready.
Asphalt cost calculator
Your planning estimate updates immediately as you change the paved area and asphalt scope. Add an address or ZIP when you want it localized with approved cost factors.
Asphalt planning estimate
Single midpoint price with the likely planning range below it.
Estimated unit rate$0.6 - $1.4 / sq ft
Materials$202
Labor$430
Overhead$263
Profit$104
1,000sq ft0in asphalt0in baseResidential drivewayuse
0Use this estimate as a starting point
This estimate is not localized yet. You can still draw it on the map, or add an address first for local context.
What changes a sealcoating estimate?
Sealcoating pricing is usually driven by area, prep, access, coating system, masking, traffic control, crack filling, patching, oil spot treatment, and whether the existing asphalt is structurally sound.
Surface condition
Sealcoating is for sound asphalt. Cracks, potholes, failed edges, and oil spots may need separate repair before coating.
Access and staging
Small driveways, tight lots, masking, traffic control, and return trips can affect labor and mobilization.
Local conditions
Weather windows, regional costs, labor availability, permit or demand context, and seasonal timing can move planning ranges.
Estimator handoff
The map estimator starts in asphalt sealcoating mode so the surface area, notes, photos, and quote request stay connected.
Ready to check the actual paved area?
Use the calculator for early numbers, then draw the sealcoating boundary and request quotes with clearer scope.